502-637-5570
  • Home
  • About
  • Products
    • Concrete Stamps >
      • Slate
      • Stone
      • Brick
      • Wood
      • Texture Mats
      • Borders and Specialty
      • Stamping Accessories Tools
    • Coatings >
      • Sealers
      • Epoxy
      • Metallic Epoxy
      • Polyurethane
      • Polyurea
    • Stains >
      • Water Based Stain
      • Acid Stain
      • Acetone Dye
    • Color
    • Countertop >
      • Cast in Place
      • Precast
      • GFRC
      • Countertop Sealers
      • Countertop Forms and Accessories
    • Overlay >
      • Stamp Overlay
      • Broom Overlay
      • Spray Overlay
      • Micro Topping
      • Trowelable
    • Tools
  • Gallery
    • Concrete Countertops
    • Stamped Concrete
    • Stamped Concrete 2
    • Concrete Overlays
    • Metallic Epoxy
    • Stained Concrete

Stamp Overlay

T1000 Stamp

Picture
Packaged in 55-pound (25 kg) bags. Each bag, when properly mixed with water, provides for approximately 24 SF at 1/4” thick (2.2m² at 6 mm thick). A polymer modified, cementitious material designed for resurfacing and texturing stable, non-moving concrete floors and hardscapes. Single application thickness can range from 1/8" (3mm) to a maximum of 1/2" (13mm), depending on thickness desired.
Use with T1000™ Primer to provide enhanced adhesion and workability of the material.
Wide range of Uni-Mix® Color Packs available. Available in Cement Gray and Cement White. (Butterfield)

​TECH DATA SHEET

T1000 Primer

Picture
A bonding agent which provides enhanced adhension, workability and curing of cementitous overlays.
Packaged in 1-gallon (3.8L) plastic bottles of concentrate, dilute 1 gallon of primer with 1 gallon of water.
At diluted strength the coverage is approximately 200 square feet per gallon, but varies with surface conditions. A second application is recommended.
Required bonding agent for use with T1000™ Stampable Overlay, Microcem, T1000™ Fine Overlay , and Cantera™ Vertical Overlay. (Butterfield)

TECH DATA SHEET


Surestamp

Picture
SureCrete’s WallStamp is a concrete wall stamp overlay mix that is stampable and also carvable. Special formulated for applying on a vertical surface with little to no slumping or sagging at 3/4 inch. Add color to enhance depth and design. (Surecrete)

TECH DATA SHEET

Proudly powered by Weebly