502-637-5570
  • Home
  • About
  • Products
    • Concrete Stamps >
      • Slate
      • Stone
      • Brick
      • Wood
      • Texture Mats
      • Borders and Specialty
      • Stamping Accessories Tools
    • Coatings >
      • Sealers
      • Epoxy
      • Metallic Epoxy
      • Polyurethane
      • Polyurea
    • Stains >
      • Water Based Stain
      • Acid Stain
      • Acetone Dye
    • Color
    • Countertop >
      • Cast in Place
      • Precast
      • GFRC
      • Countertop Sealers
      • Countertop Forms and Accessories
    • Overlay >
      • Stamp Overlay
      • Broom Overlay
      • Spray Overlay
      • Micro Topping
      • Trowelable
    • Tools
  • Gallery
    • Concrete Countertops
    • Stamped Concrete
    • Stamped Concrete 2
    • Concrete Overlays
    • Metallic Epoxy
    • Stained Concrete

Polyurethane

Poly 100: Clear & Satin

Picture
Polyurethane 100 is a two component, high solids aliphatic polyurethane. This product offers a remarkable combination of performance properties not found in other polymer coatings. Polyurethane 100 produces protective films which are hard, flexible and very impact resistant. These coatings feature high abrasion and scratch resistance, exterior durability, easy soil release and excellent resistance to a broad range of chemicals. For exterior applications, a U.V. stabilizer package is incorporated to insure long term chalk resistance and gloss retention. A special accelerator is available when rapid project turnaround is required. Polyurethane 100 has been designed as a high performance top coat in various protective coating and seamless flooring applications. It provides maximum cleanability and stain resistance when used as a finish coat in color chip flooring or epoxy-quartz flooring. This coating is ideally suited for clean-room floors, automotive repair facilities, aircraft hangars and other high wear areas requiring resistance to fuels and chemicals. When used as a finish coat in wall coating systems, anti-graffiti properties are greatly enhanced. (APF Epoxy)

TECH DATA SHEET


poly 250: Clear & Satin

Picture
All concrete sealers are not created equal. While solvent-born acrylic sealers may be the most commonly used sealer type, they are far from ideal, especially for projects with heavy foot traffic or for exterior applications. Poor wear characteristics, premature loss of gloss and water whitening issues plague contractors. Polyurethane 250, a uniquely formulated two-component acrylic urethane that is exclusive to APF and is rapidly becoming the high performance alternative to conventional solvent acrylic sealers. (APF Epoxy)



TECH DATA SHEET

poly 501: Clear & Satin

Picture
Polyurethane 501 is a high solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems. Polyurethane 501 meets the 50 grams per liter California VOC limits. It offers substantial performance improvements over first generation catalyzed water-based polyurethanes, including higher film build capabilities, improved chemical resistance and resistance to hot tire staining. (APF Epoxy)




TECH DATA SHEET



Water Based Polyurethane Satin

Picture
SureCrete’s Dura-Kote water-based clear floor polyurethane top coat is available in either a gloss or satin finish. Formulated as a high durable clear flooring protective coating for interior commercial or residential applications with low VOC properties. (Surecrete)

TECH DATA SHEET

Proudly powered by Weebly