Epoxy 100

Epoxy 100 is a two component water-based epoxy system that features ease of application, very low odor and excellent overall coating performance. This material cures blush free over a wide range of temperatures and adheres tenaciously to a variety of substrates including damp or wet concrete. Because of its affinity for moisture and inherent alkalinity resistance, Epoxy 100 may be used over green concrete with proper surface preparation.
Epoxy 100 is used as a general purpose coating for concrete floors and as a primer under epoxy, polyurethane and acrylic materials. The raw material package has a 30 year history of success as a concrete coating. Epoxy 100 is recommended for coating warehouse and factory floors, automotive repair facilities, residential garage floors and many other commercial and industrial maintenance applications. (APF Epoxy)
TECH DATA SHEET
Epoxy 100 is used as a general purpose coating for concrete floors and as a primer under epoxy, polyurethane and acrylic materials. The raw material package has a 30 year history of success as a concrete coating. Epoxy 100 is recommended for coating warehouse and factory floors, automotive repair facilities, residential garage floors and many other commercial and industrial maintenance applications. (APF Epoxy)
TECH DATA SHEET
Epoxy 200

Epoxy 200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete.
Epoxy 200 was designed for use as a fast curing primer under epoxy, acrylic, polyurethane and polyurea materials. It may also be used as a base coat in fast turnaround color chip systems. Re-coat times range from 30 minutes to 90 minutes depending on film thickness, curing conditions and the type of top coat used.
Epoxy 200 is ideally suited as a primer over properly neutralized interior acid stains where odor cannot be tolerated. Epoxy 200 primer with Polyurethane 100 or Polyurethane 501 top coats may be accomplished in one trip to the job site. Fewer trips to the job site result in reduction of labor costs. (APF Epoxy)
TECH DATA SHEET
Epoxy 200 was designed for use as a fast curing primer under epoxy, acrylic, polyurethane and polyurea materials. It may also be used as a base coat in fast turnaround color chip systems. Re-coat times range from 30 minutes to 90 minutes depending on film thickness, curing conditions and the type of top coat used.
Epoxy 200 is ideally suited as a primer over properly neutralized interior acid stains where odor cannot be tolerated. Epoxy 200 primer with Polyurethane 100 or Polyurethane 501 top coats may be accomplished in one trip to the job site. Fewer trips to the job site result in reduction of labor costs. (APF Epoxy)
TECH DATA SHEET
Epoxy 400

Epoxy 400 is a low viscosity, 100% solids resin system used in a variety of flooring applications including high build coatings, aggregate-filled flooring and decorative epoxy pebble applications. This material cures blush-free and provides an outstanding balance of physical strength, flexibility and chemical resistance.
Epoxy 400 has excellent clarity for use over color quartz aggregate and decorative architectural concrete. The pigmented material features high pigment loading for good substrate hide and color consistency when roller applied. Epoxy 400 has considerably lower viscosity than most competitive products providing improved handling at cooler temperatures and exceptional troweling characteristics. The lower viscosity allows for the addition of fine silica fillers for easy application of “slurry” type floors. A fast cure hardener is available when cold weather curing, (down to 40°F), or accelerated room temperature curing is required. A special hardener is available when adhesion to damp concrete is required.
The versatility of Epoxy 400 makes it ideal as a primer, finish coat or aggregate binder in a wide variety of flooring applications. This includes manufacturing facilities, warehouses, correctional facilities, loading docks and other areas requiring high performance flooring. Epoxy 400 is not recommended for food processing areas, commercial kitchens, wineries or other areas that receive constant corrosive exposure. Epoxy 600 or Epoxy 900 Novolac should be selected for these applications. (APF Epoxy)
TECH DATA SHEET
Epoxy 400 has excellent clarity for use over color quartz aggregate and decorative architectural concrete. The pigmented material features high pigment loading for good substrate hide and color consistency when roller applied. Epoxy 400 has considerably lower viscosity than most competitive products providing improved handling at cooler temperatures and exceptional troweling characteristics. The lower viscosity allows for the addition of fine silica fillers for easy application of “slurry” type floors. A fast cure hardener is available when cold weather curing, (down to 40°F), or accelerated room temperature curing is required. A special hardener is available when adhesion to damp concrete is required.
The versatility of Epoxy 400 makes it ideal as a primer, finish coat or aggregate binder in a wide variety of flooring applications. This includes manufacturing facilities, warehouses, correctional facilities, loading docks and other areas requiring high performance flooring. Epoxy 400 is not recommended for food processing areas, commercial kitchens, wineries or other areas that receive constant corrosive exposure. Epoxy 600 or Epoxy 900 Novolac should be selected for these applications. (APF Epoxy)
TECH DATA SHEET
SURECRETE DURA-Kote Epoxy 100%

- SureCrete’s Dura-Kote premium color epoxy 100% for floors is available in three and fifteen-gallon kits. 30 Standard colors including black, white, blue, gray, green, red and with SureCrete’s On-Demand tint machine, color matching virtually any color needed.
- Custom tinted in store. (Surecrete Design)
TECH DATA SHEET
Rapid set 100

Rapid Set 100 is a very fast setting, high strength ultra low viscosity concrete repair material. This two-part, hybrid urethane system is designed for rapidly rebuilding deeply spalled or damaged concrete surfaces, broken control joints and repairing damaged concrete rapidly, even in cold conditions. Rapid Set 100 can accept heavy loads in 10 - 15 minutes. (Surfkoat)
TECH DATA SHEET
TECH DATA SHEET